Hard Water Staining

Hard Water Staining 2019-05-24T13:48:59+10:00


Contaminants much as Salt, Chlorine, Bore & Hard Water Etches into any glass surface, making it hard to clean.


Crystal Surface Protection can restore your windows, making them look brand new, removing the staining whilst protecting with Nanokote Glass Coatings.


  • Windows Much easier to clean, Less Time and effort.
  • Save on Cost of Replacement
  • Protect and Preserve the asset.
  • Protects Windows from future deterioration
  • Extremely Cost Effective
  • Non-Intrusive
  • Same day applications
  • Return on Investment as low as 7 Months.

Bore, recycled and hard water all cause staining on windows. The harsh minerals within the water etch into the glass making cleaning difficult, similar to a shower screen. The fogging appears as the minerals bake onto the glass, forming a strong bond.

Crystal Surface Protection can not only remove the staining, but with our Australian Made Nanokote Glass Coating, stop it from sticking.

Bore water has been measured to contain over 1000 ppm (Parts Per Million). These are all hard minerals within the geology of the ground that will stick and etch into glass. In comparison, pure water is 0 ppm, Tap water varies between 30-260 ppm. Pool water can be as high at 10,000 ppm. Water dries off the glass leaving these minerals to absorb into the microstructure and create the fogging, staining appearance and rough surface of the glass.

Protect & Preserve all your glass from these minerals, and make cleaning easier.

Call Ben on 0402 927 767 for a free evaluation

Call Ben